Top

Raith EBPG-5150 EBL SS3367

Description

Used Raith EBPG-5150 Electron Beam Lithography (EBL) System – 2019, Upgraded 2025

Location: CA, USA

Used Raith EBPG-5150 Electron Beam Lithography EBL System

Raith EBPG-5150 E-beam Lithography System

Valid Term: Equipment is subject to prior sale. Available to end users only. We appreciate your interest.

The trademarks of the equipment and parts contained on this website belong to their respective Original Equipment Manufacturers.

2019 Raith EBPG-5150 Electron Beam Lithography System

SemiStar Corp. offers a 2019 Raith EBPG-5150 Ultra High Performance Electron Beam Lithography (EBL) System for sale.

The equipment is a complete system currently installed at a semiconductor foundry facility and reported by the seller to be fully operational.

The system features a 125 MHz pattern generator upgraded in 2025, a 100 kV electron beam capability, increased writing field size, automated ten-holder airlock, increased stage speed, advanced GenISys BEAMER and TRACER software, and a Z8 workstation upgrade completed in 2025.

Equipment Information

Item Description
Manufacturer Raith
Model EBPG-5150
Equipment Type Electron Beam Lithography (EBL) System
Year 2019
Major Upgrades 2025
Condition Used, Fully Operational (Seller Reported)
Configuration Complete System with Installed Options
Current Status Installed at Semiconductor Foundry
Location California, USA
Availability Early Decommissioning Possible
Removal Schedule Within 6 Months of October 16, 2026

Key Equipment Features

  • Ultra High Performance Electron Beam Lithography System
  • Thermal Field Emission Gun
  • 50 kV and 100 kV Beam Energy Calibration
  • 125 MHz Pattern Generator – Upgraded in 2025
  • Low-Noise 20-Bit Main Field Deflection
  • Increased Writing Field Size up to 1048 × 1048 µm
  • 155 × 155 mm Stage Travel
  • 0.6 nm Laser Interferometer Resolution
  • Automated Ten-Holder Airlock
  • Increased Stage Speed
  • Automatic Aperture Changer
  • Laser Height Sensor for Alignment Microscope
  • Environmental Chamber
  • Magnetic Field Cancellation System
  • Uninterruptible Power Supply
  • GenISys BEAMER Advanced Data Preparation and PEC Software
  • GenISys TRACER Monte Carlo Simulation Software
  • Z8 Workstation – Upgraded in 2025

Main System Technical Specifications

Parameter Specification
Electron Source Thermal Field Emission Gun
Beam Energy Calibration 50 kV / 100 kV
Pattern Generator 125 MHz (2025 Upgrade)
Main Field Deflection Low-Noise 20-Bit
Standard Writing Field Up to 524 × 524 µm
Increased Writing Field Up to 1048 × 1048 µm
Stage Travel 155 × 155 mm
Laser Interferometer Resolution Lambda/1024 (0.6 nm)
Airlock Automated 10-Holder Airlock
Wafer Holders 100 mm Top Reference Wafer Holder, Qty. 4
System Control Software BEAMS
System Control Computer Integrated Linux-Based PC
Pattern Preparation Computer Z8 Workstation (2025 Upgrade)

Installed Options and Accessories

Item Number Description
EBPG5150 Raith EBPG-5150 Ultra High Performance Electron Beam Lithography System
EBIPG Pattern Generator – Upgraded to 125 MHz in 2025
EBIFS Increased Field Size
EBTHA Ten-Holder Automated Airlock
EBISS Increased Stage Speed
B701128 100 mm Top Reference Wafer Holder – Qty. 4
B725220 Holder Storage Rack
EBUPS EBPG Uninterruptible Power Supply
B701230 Automatic Aperture Changer
EBPG-TSCR Touchscreen Display
B700011 Laser Height Sensor for Alignment Microscope
EBENV Environmental Chamber
PPC Pattern Preparation Computer – Z8 Workstation Upgrade (2025)
EBGEN+TRACER GenISys BEAMER Full Advanced Data Preparation + PEC Package + TRACER Monte Carlo Simulation Software
EBFCS Magnetic Field Cancellation System

2025 System Upgrades

125 MHz Pattern Generator

The original EBIPG option provided 100 MHz maximum clock speed operation with low-noise 20-bit deflection over the main field.

The pattern generator was upgraded to 125 MHz in 2025.

Z8 Workstation Upgrade

The Pattern Preparation Computer was upgraded to a Z8 workstation in 2025 to work with BEAMS V09.15H software.

Increased Field Size – EBIFS

The Increased Field Size option provides a maximum writing field of 1048 × 1048 µm.

  • Variable writing field size up to 1048 × 1048 µm.
  • Single-nanometer beam stepping capability at maximum field size.
  • Compatible with all beam currents and column voltages.
  • Reduces the number of stage movements required during exposure.
  • Supports writing of patterns within a single field to avoid stitching boundaries.

Ten-Holder Automated Airlock – EBTHA

The automated airlock accommodates 10 separate substrate holders.

The system uses the same straight-through loading design as the original two-holder airlock.

Increased Stage Speed – EBISS

The Increased Stage Speed option reduces field-to-field stepping times by approximately 3 to 5 times compared with normal stepping times.

The design incorporates active vibration isolation to manage rapid stage movements.

Wafer Holders and Storage Rack

100 mm Top Reference Wafer Holders

  • Part Number: B701128
  • Quantity: 4

Holder Storage Rack – B725220

  • Capacity for up to 20 substrate holders.
  • Transparent front panel.
  • Four independently adjustable feet.
  • Provision for nitrogen or dry-air flow.

Automatic Aperture Changer – B701230

The Automatic Aperture Changer provides motorized and software-automated control of the system’s final apertures.

  • Motorized aperture selection.
  • Save and recall multiple column alignments.
  • Automated aperture configuration.
  • Supports unattended exposure tasks.

Laser Height Sensor – B700011

The alignment microscope includes a Laser Height Sensor for fast and accurate determination of substrate surface height.

Environmental Chamber – EBENV

The environmental chamber helps reduce the influence of room-temperature fluctuations on the electron beam lithography system.

The enclosure provides an additional level of environmental stability around the equipment.

Magnetic Field Cancellation System – EBFCS

The system includes an active magnetic field cancellation system designed to reduce external electromagnetic field interference.

Uninterruptible Power Supply – EBUPS

The EBPG UPS provides a stable and clean power source for the system.

  • Isolation transformer.
  • Protection against power fluctuations.
  • Protection against voltage spikes and brownouts.
  • Short-duration backup power.

The UPS is not intended to maintain continuous system operation during extended facility power failures.

GenISys BEAMER and TRACER Software

GenISys BEAMER Full Advanced Data Preparation + PEC Package

The equipment configuration includes the GenISys BEAMER advanced data preparation and proximity effect correction package.

GenISys TRACER Monte Carlo Simulation Software

TRACER provides Monte Carlo simulation capabilities for calculating proximity correction parameters.

The software also supports advanced proximity effect correction techniques, including shape correction and 3D correction for multilayer resist applications.

Equipment Availability and Sales Information

The Raith EBPG-5150 is currently installed at a semiconductor foundry facility in California, USA.

  • 2019 system with major upgrades completed in 2025.
  • Complete equipment configuration.
  • Fully operational condition reported by the seller.
  • Currently installed.
  • Early decommissioning possible.
  • Equipment subject to prior sale.
  • Available to end users only.

Request a Quotation

Please contact SemiStar Corp. for additional equipment information, photographs, pricing, and purchasing arrangements.

Please contact us for more information on the product:

Your Name*:

Your Email:

Your Message:

Captchac Codecaptcha

Submit:

SS3367-S-1

Raith EBPG-5150, Used Raith EBPG-5150, 2019 Raith EBPG-5150, Raith EBPG-5150 125 MHz, Electron Beam Lithography, EBL System, Used E-Beam Lithography Equipment, 100 kV Electron Beam Lithography, Electron Beam Writer, Raith E-Beam Writer, High Resolution Electron Beam Lithography, GenISys BEAMER, GenISys TRACER, Semiconductor Lithography Equipment, Used Semiconductor Equipment, Nanofabrication Equipment.

The trademarks of the equipment and parts contained in this website belonged to the Original Equipment Manufacturers