Description

AG Associates Heatpulse 4100 8108 8800 8800i specifications in PDF

Model: Heatpulse 4100

Category: RTP – Rapid Thermal Processing

Original Equipment Manufacturer: AG Associates

Condition: Used, Complete, working condition. Fully Refurbished and Tested by seller

Valid Time: Subject to prior sale without notice. This item is only for end user.

Lead Time: TBD

Quantity: 4 sets available

Location: Morgan Hill,CA, U.S.A.

Warranty: TBD

Installation and training: Available at extra charge

Service Contract: Available at extra charge

AG Associates Heatpulse 4100 Rapid Thermal Processing equipment description

The AG Associates Heatpulse4100 rapid thermal anneal system contains a subsystem for each of the following:
• Electronics (including a dedicated microprocessor)
• Mass-flow-controlled gas handling
• Cooling
• ULPA filtration
• Mechanical assemblies
Software programs, called recipes, specify the details for each process. The AG Associates Heatpulse 4100 system includes a 3-1/2-inch floppy disk drive for process recipe storage. A three-axis industrial robot automates processing by transporting wafers into and out of the process chamber. It uses closed-loop feedback for precise motion control and accurate positioning.
To provide cold-wall processing, water is circulated through the process-chamber walls. The quartz isolation tube is cooled with nitrogen or compressed air.

AG Associates Heatpulse 4100 Rapid Thermal Anneal equipment APPLICATIONS:

The Heatpulse 4100 system is a versatile tool which can be useful for many applications, such as (but not limited to):
• Silicon dielectric growth
• Implant annealing
• Glass re-flow
• Silicide formation and annealing
• Nitridation of metals
• Contact alloying
• Oxygen donor annihilation

AG Associates Heatpulse 4100 Rapid Thermal Processing Equipment Specifications:

Operating Specifications

The following are the operating specifications for the Heatpulse® 4100 system.

- Wafer handling: automatic serial processing, using standard cassettes.
- Throughput: Process dependent, approximately 80 wafers per hour (in a null cycle) without flat-finder.
- Wafer sizes: 3 inches, 4 inches, 5 inches, 6 inches (standard).
- Ramp-up rate: Programmable, 1 – 180°C per second.
- Steady-state duration: 1 – 600 seconds per step.
- Ramp-down rate: Programmable, 1 – 180°C per second. Ramp-down rate is temperature and radiation dependent, maximum 150°C per second.
- Recommended steady-state temperature range: 400 – 1200°C.
- ERP temperature accuracy: +5°C to -9°C, when calibrated against an instrumented thermocouple wafer (ITC).
- Temperature repeatability: + 7°C or better at 1150°C wafer to wafer. (Repetition specifications are based on a 100-wafer set.)
- Temperature uniformity: + 10°C across an 6-inch wafer at 1150°C. (This is a 1-sigma deviation from 100-angstrom oxide uniformity.) For a titanium silicidation process, no more than 1.5 percent increase to uniformity during the first anneal at 650 – 700°C.

AG Associates Heatpulse 4100 Physical Dimensions

- Width: 40 in. (102 cm)
- Depth 42 in. (107 cm)
- Height 82 in. (208 cm)
- Weight:: 1800 lbs (816 kg)
- Shipping weight:: 2000 lbs (907 kg)

AG Associates Heatpulse 4100 Utility Requirements

- Power StandardWater Type Refer to the Heatpulse® 4100 Facilities Manual.(Recirculator)
  - Domestic: 208 VAC, 60 Hz; 125 A maximum;3-phase plus ground and neutral
  - European: 400 VAC, 50 Hz; 90 A maximum;3-phase plus ground and neutral
  - Japanese: 200 VAC, 50/60 Hz, 125 A maximum; 3-phase plus ground

AG Associates Heatpulse 4100 Rapid Thermal Anneal equipment FEATURES:

The AG Associates Heatpulse 4100 Rapid Thermal Annealing system contains many capabilities which provide significant advantages over conventional batch processing in the production of VLSI circuits. Cleanroom integrity, precise temperature control and measurement, software flexibility, and the physical structure of the system (designed for the production environment) are among these advantages.

Contaminant-Free Processing

The Heatpulse 4100 system is designed with the cleanroom environment in mind. The following are the key features which make this Heatpulse 4100 system contaminant-free:

• Stainless-steel laminar flow processing floor and ULPA filter located in the processing area to reduce the number of particles in the environment. The walls of the processing area are also stainless steel.
• Design which prevents particles from circulating around the wafer-handling area, which allows the front panel door to remain open during processing.
• Easy service access available from rear and side panels.
• Through-the-wall installation, which maintains cleanroom integrity.
• No belts and pulleys (a large source of particle contamination) exist in the 8108 wafer-handling area.
• Front touch-screen controller remotely mounted to further reduce particle attraction.

Heating, Cooling, and Temperature Measurement

The following lists the key features of Heatpulse 4100 heating, cooling, and temperature measurement:
• High-intensity radiation which heats wafers for short periods of 1 to 600 seconds at precisely controlled temperatures in the 400-to-1200°C range.
• Tungsten halogen lamps and cold process-chamber walls which allow fast wafer heating and cooling rates, respectively.
• Lamps arranged in 2 banks of 14 lamps each, 1 bank above and the other below the process chamber. Upper lamps which run crosswise and lower lamps which run lengthwise. Thus, the upper and lower lamps are at right angles to each other for optimization of temperature control. In addition, 10-zone lamp control to enable further wafer uniformity.
• The system delivers time and temperature profiles tailored to suit specific process requirements.
• Pyrometer or thermocouple sensing which offers precise closed-loop temperature control.
• Open-loop intensity control (OLIC) option which offers accurate, repeatable temperature control. (This feature requires ±0.5 VAC at 208 VAC line voltage regulation to function accurately.)
• Purge gas which flows through the process chamber and cooling gas (CDA) which flows around the isolation tube and lamps.
• Water de-ionizing system for oven cooling water to minimize metal corrosion.

Software

The AG Associates Heatpulse system features touch-screen operation which is easy to learn. Additional software features are listed below.
• Menu screens which allow a process cycle to be easily defined and executed.
• Status reports continually displayed on the screen as the system operates.
• Self-diagnostic routine active whenever the system is on and terminates the cycle in progress if an abnormal condition is detected.
• Access codes which provide security for the system, recipe programming, and diagnostic functions.
• Highly flexible recipes and process procedures.
• Simple and easy-to-use menu screens.
• Touch-screen menus which eliminate the need for special commands.
• Manual mode which allows engineers and service personnel to activate individual subassemblies and functions.
• Discrete diagnostic routines, using a separate Diagnostic mode, are available.
• Maintenance menu which allows you to customize messages by condition and date to appear on the GUI screen at a set time.
• Thermal processing cycles which may be customized for unique processing requirements.
• Custom recipes created by process engineers which may be saved on floppy diskette and executed by production line operators.

Service Access

The AG Associates Heatpulse 4100 system has been built for fast servicing in the production environment which provides low mean time to repair (MTTR ). The features listed below reflect this purpose:
• Optional menu screen available at the rear of the system, enabled through a key control switch.
• Gas box specifically designed for easy access and maintenance.
• Front access window closes to prevent cleanroom contamination during maintenance for through-the-wall installation.
• Top window, which flips out of the way, enables easier wafer-handling area access.

Wafer Handling, Control, and Accuracy

Heatpulse 4100 wafer-handling system features include the following:
• Consistent wafer-to-wafer process cycle repeatability
• Optional send and receive cassette bases which swivel to accommodate loading and unloading by a cleanroom robot in a fully robotic environment
• Antistatic Ion Bar in the laminar flow system which reduces electrostatic charges on wafer handling components.
• Controlled ambient
• Robotic transport of wafers in excess of 80 wafers per hour (in a null cycle without the flat-finder option)
• A process-per-wafer (PPW) feature which enables you to program a different recipe for each wafer in a cassette. For pick-and-place operation, one recipe and be selected for each cassette, or up to 50 different recipes can be programmed when two 25-slot cassettes are used, or 52 recipes when two 26-slot cassettes are used

MSP-248 “>KEYWORDS: Rapid Thermal Process, Modular Process Technology, Rapid Thermal Processing, Rapid Thermal Anneal, Rapid Thermal Annealing, Rapid Thermal Oxidation, Rapid Thermal Nitride, RTA, RTP, RTO, RTN,, Semiconductor Equipment, Used Semiconductor Equipment, Semiconductor Process Equipment, AG210, AG310, AG 410, AG610, AG 610I, AG Associates, Heatpulse 210, Heatpulse 410, Minipulse 310, Heatpulse 610, Heatpulse 610I, AG Heatpulse 410, AG Heatpulse 610, AG Heatpulse 210, AG Minipulse 310, 4100 , 4100S 4108, 8108 ,Atmospheric Rapid Thermal Process, Vacuum Rapid Thermal Process, Furnace, Oven, Thermal Furnace, Thermal Process, Thermal Processing,JIPELEC, ag2146,JetClip,JetStar, AST SHS2000, AST STEAG 2800, ssintegration, Rapid Thermal Oxide,JetFirst ,Mattson, annealsys, heatpulse ,ag 2146,Koyo Thermo Systems,AST STEAG-MATTSON 2800, STEAG-MATTSON 2900, STEAG-MATTSON 3000, heat pulse, Solaris, Eclipse ,modularpro, RLA-1000, AG Heatpulse, rapid thermal processor, Steag AST SHS2000, Solaris 75, Solaris75,STEAG Electronic Systems ,eng-sol, Annealsys, RLA-3000, Engineering Solutions ，Solaris 150, Rapid Thermal Annealer , AS-Master ,modularpro,RTO ,Modular Process Technology, Solaris150,AS-One,AS-Micro, ADDAX, JetFirst, JetLight, JetStar, MPT-600S,MPT-800S, MPT-600XP, MPT-800XP, MPT-3000, Jipelec Jetfirst 150,Jipelec Jetfirst 200, JETFIRST 100,AnnealSys AS-One, RTP-3000, ULVAC, Ulvac Technology MILA 3000 ,Rapid Thermal Annealing, ULVAC RTA-2000,ULVAC RTA-4000,ULVAC RTA-6000,ULVAC RTA-8000,ULVAC RTA-12000, EasyTube® 3000EXT, CVD Equipment Corporation, Dr. Eberl MBE-Komponenten GmbH, AO 600,Rapid Thermal Annealing System,MBE Components,MBE Systems,OCTOPLUS 300,OCTOPLUS 400,OCTOPLUS 500,OCTOPLUS 500 EBV,OCTOPLUS 600,OCTOPLUS 600 EBV,OCTOPLUS-O 400,Thin Film Systems,Organic Deposition System,Rapid Thermal Annealing,MBE Components,Thin Film / CIGS / CZTS / CdTe,ECM, Annealsys AS-Premium, Annealsys Zenith-100, Annealsys AS-One, Annealsys AS-Master, Jipelec JetStar, Annealsys AS-Micro, Jipelec JetLight, Jipelec JetFirst 100, Jipelec JetFirst 200, Jipelec JetFirst 300, CreaTec Fischer & Co. GmbH, Rapid Thermal Anneling System, Mini MBE System,Growth System, Research Linear Transfer System,RTA System,UHV Shuttle System, SemiTEq JSC, Molecular-Beam Epitaxy Systems (MBE),PVD Systems,RTP & RTA Systems,ICP/RIE/PECVD Systems,Components and accessories, STE RTP150, STE RTA100, STE ICP200 , ADVANCE RIKO, Inc., RTP-mini, Atmospheric Thermoelectric Module Evaluation System F-PEM,Mini Lamp Annealer MILA-5050,infrared lamp heating system, ULTECH CO.LTD,Real RTP-100,Real RTP-100,Real RTP-150,Real RTP-Mini,SPUTTER,DRY ETCHER,PECVD,ALD,E beam evaporator,Thermal Evaporator, SJ High Technology ,Tube RTA,R-8160,drawer type RTA, R-401, Dai-ichi Kiden Co.,Ltd., Combustion furnace,High vacuum heating system,Vertical high temperature heating system,Induction heating system(elevating),Ultra high temperature heating system, Koyo Thermo Systems Co.,Ltd., Premtek Technology Co，技鼎股份有限公司，技鼎股份有限公司，VF-5900 300mm Large Batch,VF-5700 300mm Mini Batch,VF-5300,8 inch,Large Batch,VF-5100,8 inch,Wide-Range Batch,VF-3000,8 inch,Low-Cost Mini Batch,VF-1000,Small Production and R&D,VFS-4000,Large Bore Vertical Furnace,Koyo Thermo Systems Co.,Ltd.,Model 200 Series Horizontal Furnaces for Mass Production and Experiments,Model 206A Horizontal Furnace for PV Production ,Model 206A Horizontal Furnace for PV ,Production,RLA-3100 Lamp Annealing System for Rapid Thermal Processing,RLA-1200 Lamp Annealing System for Rapid Thermal Processing,RLA-1200 Lamp Annealing System for Rapid Thermal Processing,SO2-12-F Heated-air Circulating Type Clean Oven for 300-mm Wafers,CLH Series High-Temperature Clean Ovens,CLH Series High-Temperature Clean Ovens,VFS-4000 Large Bore Vertical Furnace,VF-5300HLP Activation Annealing Furnace,VF-5300H Vertical Furnace for Gate Insulating Film Formation,VF-5300H Vertical Furnace for Gate Insulating Film Formation,RLA-4106-V Lamp Annealing System for Contact Annealing,RLA-4106-V Lamp Annealing System for Contact Annealing,VF-3000HLP Activation Annealing Furnace, VF-3000HLP Activation Annealing Furnace,VF-3000H Vertical Furnace for Gate Insulating Film Formation,VF-3000H Vertical Furnace for Gate Insulating Film Formation,RLA-3100-V Lamp Annealing System for Contact Annealing,RLA-3100-V Lamp Annealing System for Contact Annealing,Rapid temperature rise annealing furnace RTP_Table ，RTP_Table type rapid temperature rise annealing furnace，Rapid temperature rise annealing furnace RTP_SA ，RTP ，semi-automatic rapid temperature rise annealing furnace，Rapid temperature rise annealing furnace ，RTP_Auto ，automatic rapid temperature rise annealing furnace，RTP600V，RTP600Z，RTP500Z，RTP500V，RTP500SV，快速退火炉，北京东之星应用物理研究所，快速升溫退火爐，estarlabs，Glovebox+PVD,2D material CVD,LPCVD & Furnace,Vacuum Sintering Furnace,RTP,Plasma Doping (PDS),ASHER,Wet bench,Crystal Si solarcell
AG Associates Heatpulse 8108, Heatpulse 8108 rapid thermal processor, Heatpulse 8108 RTP, Heatpulse 8108 system, Heatpulse 8108 parts, Heatpulse 8108 service, Heatpulse 4108 RTP, Heatpulse 4100 RTP, Heatpulse 8800 RTP, Heatpulse 8800i,AG Associates RTP system, AG RTP repair, AG RTP support, AG 8108 spare parts, Heatpulse lamp module, RTP lamp module, RTP halogen lamps, RTP tungsten lamps, RTP reflector plate, RTP quartz tube, RTP quartz tray, RTP pyrometer, RTP thermocouple, RTP temperature controller, RTP power supply, RTP lamp driver, RTP motherboard, RTP PCB repair, RTP chamber rebuild, RTP hot zone assembly, RTP quartzware, RTP window plate, RTP susceptor tray, wafer annealing furnace, rapid thermal annealing system, rapid thermal annealing tool, RTA system, RTA furnace, spike annealing, spike RTA, soak annealing, dopant activation anneal, implantation activation anneal, thermal oxidation anneal, rapid thermal oxidation, rapid thermal nitridation, RTP stability test, RTP uniformity testing, RTP calibration service, RTP preventive maintenance, RTP PM kit, RTP software upgrade, RTP controller repair, RTP recipe development, RTP consulting service, RTP custom recipe, wafer thermal processing, semiconductor furnace, semiconductor thermal processor, semiconductor annealing furnace, semiconductor RTA tool, FEOL thermal tool, semiconductor front end tools, wafer processing equipment, used RTP equipment, refurbished RTP tool, refurbished Heatpulse systems, used semiconductor equipment, fab equipment reseller, semiconductor equipment refurbishment, RTP equipment refurbishment, equipment lifetime extension, legacy tool support, AG Associates legacy support, obsolete equipment support, hard-to-find RTP parts, RTP spare parts supplier, RTP tool upgrade, RTP engineering support, RTP performance improvement, wafer temperature control, wafer thermal uniformity, rapid wafer heating, thermal quench cooling, single wafer annealing, atmospheric RTA furnace, nitrogen annealing system, argon annealing system, forming gas anneal furnace, oxygen anneal furnace, vacuum annealing option, Si wafer annealing, GaN wafer annealing, SiC wafer annealing, CMOS anneal, thin film annealing, RTP glass cleaning, quartz tube cleaning, chamber cleaning, process gas manifold, MFC replacement, MFC repair, gas flow controller, AG 4100 alignment, AG 4100 troubleshooting, Heatpulse user manual, Heatpulse maintenance service, Heatpulse engineering support, thermal process optimization, fab engineering services, wafer fab tool support, semiconductor equipment service provider, RTP lamp calibration, RTP tool diagnostics, fab tool troubleshooting, semiconductor tool repair, semiconductor equipment dealer, RTP oven, high temperature RTA, 1200C RTA, 1300C RTA, rapid ramp furnace, rapid thermal cycle, thermal process uniformity, halogen lamp heating, RTP lamp alignment, RTP power cabinet, AG 4100 wiring harness, Heatpulse gas panel, Heatpulse cooling system, Heatpulse airflow path, Heatpulse lift mechanism, wafer handling system, wafer carrier, wafer tray, quartz hardware supplier, quartz spare parts, OEM quartz tube, OEM quartz tray, semiconductor quartzware supplier, thermal process engineering, semiconductor production equipment, wafer heat treatment, semiconductor annealing solution, fab cost reduction, used tool alternative, RTA furnace supplier, Heatpulse distributor, RTP global supplier, RTP USA supplier, Heatpulse international sales, semiconductor RTP expert, semiconductor anneal system provider, wafer fab equipment refurbisher, AG tool replacement parts, thermal chamber rebuild, semiconductor equipment upgrade, Heatpulse 4100 sales, RTA machine, annealing furnace system, wafer heat process tool, semiconductor process equipment supplier, thermal treatment furnace.AG Associates Heatpulse 4100, Heatpulse 4100 快速热处理系统, Heatpulse 8108 快速退火炉, Heatpulse 8108 RTP, Heatpulse 8108 维修, Heatpulse 8108 配件, Heatpulse 4108, Heatpulse 4100, Heatpulse 8800, AG RTP 系统, AG 热处理设备, AG 退火炉翻新, AG 8108 替换配件, 快速退火炉, 快速热处理炉, 半导体快速退火, 半导体退火炉, RTA 系统, RTA 快速退火炉, 保护气氛退火炉, 氮气退火炉, 氩气退火炉, 氢氮混合气退火, 氧气退火炉, 真空退火炉, 刺激退火 spike anneal, 浸泡退火 soak anneal, 激活退火, 掺杂活化退火, 氧化退火, 氮化退火, 薄膜退火, 晶圆快速加热, 晶圆快速冷却, 晶圆热处理, 半导体前道工艺设备, 前道热处理工具, 半导体热处理炉, 单片退火炉, 快速升温炉, 快速降温炉, 退火均匀性, 温度均匀性, 热处理稳定性测试, RTP 校准服务, RTP 预防性维护, RTP PM 套件, RTP 控制器维修, 温度控制系统, Pyrometer 光学测温仪, 热电偶, 气体质量流量计 MFC, MFC 替换, MFC 维修, 气路系统, 气体歧管, RTP 灯管组件, 卤素灯加热系统, 钨灯加热模块, 反射板, 石英管, 石英托盘, 石英舟, 石英器件, 石英窗口, 热区组件 hot zone, 炉腔 rebuild, 炉腔清洁, 石英清洁, 工艺腔室清洁, 热处理配件供应商, OEM 石英件, 原厂等同石英件, 难找配件, 停产设备支持, 旧设备支持, 退火炉升级, 控制系统升级, 软件升级, 电源维修, 主板维修, PCB 板维修, 热处理工艺优化, 工艺开发, 配方开发, 工艺示范, 晶圆工艺退火, Si 晶圆退火, GaN 晶圆退火, SiC 晶圆退火, CMOS 退火, 掺杂激活, 金属硅化退火, 气氛控制退火, RTA 工艺气体, N2 退火, Ar 退火, O2 退火, Forming gas 退火, 高温退火 1200°C, 超高温退火 1300°C, 加热速率, 降温速率, 快速热循环, 热模型校准, 灯管校准, RTP 设备调试, 退火炉安装, 退火炉培训, 故障诊断, 故障排查, 晶圆承载盘, 晶圆托盘, 晶圆支撑板, 晶圆搬运, 半导体设备服务, 半导体设备供应商, 二手半导体设备, 二手退火炉, 二手前道设备, 设备翻新, 旧设备翻新, 退火炉翻新, 热处理设备翻新, 工厂停产设备支持, 低成本退火解决方案, 替代原厂设备, 设备延寿服务, fab 节省成本方案, 热处理工程支持, 热处理解决方案, Heatpulse 专家服务, RTP 工程支持, RTP 全球供应商, 美国 RTP 供应商, 半导体热处理专家, 晶圆热处理解决方案, 制造线退火设备, 热处理机台供应商, 半导体工厂设备, 热处理炉制造商, 工艺设备维护, 退火设备零件, AG 8108 工程师支持, Heatpulse 全球销售, 半导体 anneal 工具, 退火机台销售, 半导体加热炉, 工艺热处理设备, 半导体设备维修, 热处理炉配件, 晶圆制造设备, 半导体工艺设备销售.