Description
List of Semiconductor tester instruments we have for sale. They are from different owners from all over the world. They are subject to prior sale without notice. They are only for end users. Pls contact us if you are interested in any of them. Appreciate your time.
| No | Make | Model | Type | Configuration |
| 1 | Advanced Energy | MDX-L 12 M | Power Supply | M/N 3152313-014 A 208 V, 3 phase, 4 wires power |
| 2 | Advanced Energy | Pinnacle M/N 3152412-233 A | Generator | – 20kW |
| 3 | Advantest | R 3162 | Spectrum Analyzer | – 9kHz-8GHz – Malfunctioning display when machine turns on. View our video for details. |
| 4 | Advantest | TQ 8346 | Optical Spectrum Analyzer | |
| 5 | Aeroflex Weinschel | 7005 A 3 | Planar Crown RF Connector | 18 GHz |
| 6 | Agilent | 4395 A | Network / Spectrum / Impedance Analyzer 10 Hz to 500 MHz | – Firmware: Rev 01.04 – The unit passes all of the start up tests |
| 7 | Agilent | N 5106 A | PXB Baseband Generator and Channel Emulator | |
| 8 | Agilent | Harrison 6428 B | DC Power Supply | 0-20V 0-45A |
| 9 | Agilent | E 366 XA, E 390 XA Series, Model C 2786-60024 | Electric Cabinet | – Rack Only (Test Equipment inside not included) |
| 10 | Agilent | 8561 B | Spectrum Analyzer | – 5.5GS/s – 50Hz – 6.5GHz |
| 11 | Agilent | 8703 A | Lightwave Component Analyzer | – 1550 nm / 130 MHz- 20 GHz – OPT: 012100210 |
| 12 | Agilent | 8168 F | Tunable Laser Source | With Option 022 (Angled Contact) |
| 13 | Agilent | 81576 A | Variable Optical Attenuator Module | with Power Control |
| 14 | Agilent | 86130 A | BitAlyzer Error Performance Analyzer | – 3.6 GB/s Following errors occur at boot up: – 0251: System CMOS checksum bad – 02BO: Diskette drive A error |
| 15 | Agilent | 83493 A | Single-Mode Clock Recovery Module | – 2500 Mb/s |
| 16 | Agilent | 8164 A | Lightwave Measurement System | |
| 17 | Agilent | 8163 A | Lightwave Multimeter | – With Agilent 81576A Attenuator Power Control |
| 18 | Agilent | 83493 A | Single-Mode Clock Recovery Module | – 2500 Mb/s |
| 19 | Agilent | 83493 A | Single-Mode Clock Recovery Module | – 2500 Mb/s |
| 20 | Agilent | 83493 A | Single-Mode Clock Recovery Module | – 2500 Mb/s |
| 21 | Agilent | E 4402 B | Spectrum Analyzer | – 9kHz – 3.0GHz |
| 22 | Agilent | E 6607 A | EXT Wireless Communication Test Set | – 50/60/400 Hz |
| 23 | Agilent | N 4872 A | Data Generator 13.5Gb/s / 7Gbs | |
| 24 | Agilent | 81134 A | Pulse / Pattern Generator, 3.35GHz | – 47-63Hz – 100-240V – 200VA |
| 25 | Agilent | 81133 A | Pulse / Pattern Generator, 3.35GHz | – 47-63Hz – 100-240V – 200VA |
| 26 | Agilent | 8644 A | Synthesized Signal Generator | Option : 001, 002 |
| 27 | Agilent | 4275 A | Multi-Frequency LCR Meter | – Internal power supply is damaged, blows fuses – Parts System |
| 28 | Agilent | 5370 B | Universal Time Interval Counter | – 2.5 A – 1.25 AT – 220 VA Max |
| 29 | Agilent | 8114 A | Pulse Generator | – 100V / 2A – Option 001 Installed – Error: The unit gives the following error when running the self-test for the signal: No input from output board The problem is on the output board (Part 08114-66506) The fuse F103 on the output board is broken (fuse for floating +17 volt rail) The fuse is a 1/8 amp through hole fuse (Mouser P/N 576-0251.125MXL) The floating +17 volt rail is fine coming from the power supply. There is approx. 35 volts on the other side of the fuse and has 20 ohms resistance to ground while the unit is powered up. All other boards in the unit have been tested and are working. |
| 30 | Agilent | 6645 A | DC Power Generator | – Voltage 0-120V, Amp 0-1.5A – Unit is tested and fully functional |
| 31 | Agilent | 81104 A | Pulse / Pattern Generator | – Parts Unit – 80 MHz – One output board is broken and one output board is missing (HP 81110-66508) – It still has a good power supply, front end/working screen – The following self tests pass: Interface, microprocessor, ROM and RAM |
| 32 | Agilent | E 4426 B ESG-AP Series | Signal Generator | |
| 33 | Agilent | E 4438 C ESG | Vector Signal Generator | – 250 kHz – 2.0 GHz – Options: 005, 1E5, 409, 502, 602 |
| 34 | Agilent | N 4903 B | J-BERT High Performance Serial BERT 12.5 Gb/s | Options: C13, D14, U02 Passes all self-tests |
| 35 | Agilent | 8562 B | Spectrum Analyzer | – 1kHz-2.9GHz & 2.75GHz-22GHz |
| 36 | Agilent | E 5287 A | Atto Level High Resolution SMU Module | – Passes self test and calibration |
| 37 | Agilent | E 5287 A | Atto Level High Resolution SMU Module | – Passes self test and calibration |
| 38 | Agilent | E 5287 A | Atto Level High Resolution SMU Module | – Passes self test and calibration |
| 39 | Agilent | E 5287 A | Atto Level High Resolution SMU Module | – Passes self test and calibration |
| 40 | Agilent | 85052 B | 3.5mm Calibration Kit | Includes: – Software – HP 85052-60040 3-26.5 GHz – 3.5mm Sliding Load – One Male Connector Gage 3.5mm – One Female Connector Gage 3.5mm |
| 41 | Agilent | 85110 A K-30 | Test Set Control / IF Multiplexer | – Option: K30 |
| 42 | Agilent | N 2890 A | Passive Probe for Oscilloscope | – 500 MHz – 11pF – 300 VRMS – New in box |
| 43 | Agilent | N 2890 A | Passive Probe for Oscilloscope | – 500 MHz – 11pF – 300 VRMS – New in box |
| 44 | Agilent | N 2890 A | Passive Probe for Oscilloscope | – 500 MHz – 11pF – 300 VRMS – New in box |
| 45 | Agilent | N 2890 A | Passive Probe for Oscilloscope | – 500 MHz – 11pF – 300 VRMS – New in box |
| 46 | Agilent | 4294 A | Precision Impedance Analyzer 40Hz-110MHz | Options: 800 Unit passes all self tests |
| 47 | Agilent | 04294-61001 | 100 Ohm Resistor | |
| 48 | Agilent | 6236 B | Triple Output Power Supply | 0-6V, 0-2.5A / 0+/-20V, 0-0.5A |
| 49 | Agilent | 4194 A | Impedance / Gain-Phase Analyzer with Measurement Unit | – 100Hz-40MHz – Options: OPT350 – Notes: Version 2.3, Scope appears to be working, passes start up tests and is able to make measurements |
| 50 | Agilent | 4194 A | Impedance / Gain-Phase Analyzer with Measurement Unit | Options: OPT350 Notes: Version 2.4, Scope appears to be working, passes start up tests and is able to make measurements |
| 51 | Agilent | 1745 A | Oscilloscope | – 100 MHz |
| 52 | Agilent | 86140 B | Optical Spectrum Analyzer | – Passes self tests on start up |
| 53 | Agilent | 8350 B | Sweep Oscillator | – with 83595 A RF Plug-In – .01-26.5 GHz |
| 54 | Agilent | 3457 A | 6.5 digit Multimeter DMM | – Unit passes self test |
| 55 | Agilent | 34902 A | 16 Channel Multiplexer | |
| 56 | Agilent | 34902 A | 16 Channel Multiplexer | |
| 57 | Agilent | 83595 A | RF Plug-in | .01-26.5 GHz |
| 58 | Agilent | 8350 B | Sweep Oscillator | .01-26.5 GHz |
| 59 | Agilent | 6460 A | Triple Quad Mass Spectrometer (LC/MS) | With a jet stream ESI source, rougher pump and quiet cover. |
| 60 | Agilent | 81654 A | Laser Source Module | |
| 61 | Agilent | 81614 A | Return Loss Module | |
| 62 | Agilent | 81632 B | Power Sensor Module | |
| 63 | Agilent | 81656 A | Laser Source Module | |
| 64 | Agilent / Keysight | E 8257 N | PSG Analog Sweep Signal Generator | – 10MHz-40 GHz Options: – 007 – RAMP SWEEP (STD) – 1E1 – MECHANICAL ATTENUATOR (STD) – 1EH – IMPROVED HARMONICS BELOW 2.0 GHz – 1EU – HIGH OUTPUT POWER – 340 – ENABLE FULL E8257D FEATURE SET – 540 – 40 GHz FREQUENCY (STD) – UNT – AM/FM/PHASE MODULATION AND LF OUT (STD) – UNW – HIGH-PROFORMANCE PULSE MODULATION (STD) – U01 – R2C: CORE FW ENHANCEMENT – U02 – R2C: CORE FW ENHANCEMENT, C.06.15 This unit passes all self tests |
| 65 | Ando | AQ 8203 | Halfsize Frame | |
| 66 | Ando | AQ 2141 | Optical Multimeter Expansion Frame | |
| 67 | Ando | AQ 4321 D | Tunable Laser Source | – Passes start up tests and completes self calibration |
| 68 | Ando | AQ 4321 A | Tunable Laser Source | – Passes start up tests and completes self calibration |
| 69 | Anite | 12954 | Dual RF Antenna Combiner | – Rev 1.2 – Dual Antenna – Power 120/240 – 50/60Hz – 6/3A |
| 70 | Anritsu | MU 150100 A DVT | – 10/10.7 G Unit | |
| 71 | Anritsu | MS 96 A | Optical Spectrum Analyzer | |
| 72 | Anritsu | MT 8801 B | Radio Communication Analyzer – 300kHz-3GHz | |
| 73 | Anritsu | MP 1590 B | Network Performance Tester | with 3 Modules: – MU150100A 10/10.7G Unit – MU150121B 10/10.7G Optical / Electrical Unit (Tx) – MU150125A 10/10.7G Jitter Unit |
| 74 | Anritsu | MS 9001 A 1 | Optical Spectrum Analyzer | – 0.6-1.75um – Powers ON, Screen does not work |
| 75 | Anritsu | MP 1763 B | Pulse Pattern Generator | – 0.05-12.5GHz |
| 76 | Anritsu | MP 1763 C | Pulse Pattern Generator | – 0.05-12.5GHz |
| 77 | Anritsu | 37347 A | Vector Network Analyzer | – 40MHz-20GHz |
| 78 | Anritsu | MP 1632 C | Digital Data Analyzer | Plug-ins Included: – MU163220C 3.2G PPG – MU163240C 3.2G ED |
| 79 | Anritsu | MW 9076 D | Optical Domain Time Reflectometer | – SMF 1.31/1.41/1.55/1.625UM OTDR |
| 80 | Applied Materials | Profiler Carrier | P/N: 0040-51791 | |
| 81 | Applied Materials | Profiler Membrane | – P/N: 0020-75115 – New and sealed in OEM bag |
|
| 82 | Applied Materials | Retaining Ring Grooved PPS AEP 300MM | Profiler Retaining Ring | – P/N: 0040-49965 – New in sealed OEM bag |
| 83 | Applied Materials | Lower Cross Cover | – P/N: 0020-79378 – Includes wafer loss sensor and PCB |
|
| 84 | Applied Materials | 0010-19188 | Assy, Bosch Rexroth Wafer Lift Assembly | – Rev. – 001 , 3007051-488-5818 – Panasonic Servo MQMAO12A3F |
| 85 | Applied Materials | Original Profiler Carrier | Profiler Carrier | P/N: 0040-51791 |
| 86 | Applied Materials | Original Profiler Carrier | Profiler Carrier | P/N: 0040-51791 |
| 87 | Applied Materials | Profiler Membrane | – P/N: 0020-75115 – New and sealed in OEM bag |
|
| 88 | Applied Materials | Profiler Membrane | – P/N: 0020-75115 – New and sealed in OEM bag |
|
| 89 | Applied Materials | Retaining Ring Grooved PPS AEP 300MM | Profiler Retaining Ring | – P/N: 0040-49965 – New in sealed OEM bag |
| 90 | Applied Materials | Coated Silicone 300mm Titan | Profiler Membrane | P/N: 0020-75159 |
| 91 | Applied Materials | 200mm Lower Cross Cover includes Wafer Loss Sensor and PCB | Lower Cross Cover | – P/N: 0020-79378 – Includes wafer loss sensor and PCB |
| 92 | Applied Materials | 200mm Lower Cross Cover includes Wafer Loss Sensor and PCB | Lower Cross Cover | – P/N: 0020-79378 – Includes wafer loss sensor and PCB |
| 93 | Applied Materials | 0190-13714 | Assy, Bosch, Motorized Lift, PVD/PC Panasonic | – Complete stand |
| 94 | Applied Materials | 0190-13714 | Assy, Bosch, Motorized Lift, PVD/PC Panasonic | Used, damage to motor see pictures |
| 95 | Applied Materials / Semplastics | Retaining Ring AMT MRA ACIES X3G | 300mm Profiler Retaining Ring | – For Amat Mirra – Open in Bag – P/N: S-9073 |
| 96 | Applied Materials / SPM Technology | Retaining Ring AMT MRA ACIES X3G | 300mm Profiler Retaining Ring | – For Amat Mirra – New in OEM Bag – P/N: 30675 |
| 97 | Asyst | SMIF Wafer Case Transfer Pod | – Internal Wafer Transport Carrier: Entegris KA198-80MB STAT-PRO 3000, 25 slots – Part Number: 4001-7102, 4001-4302-XX Rev C – Carrier seems to be in good condition |
|
| 98 | Asyst | SMIF Wafer Case Transfer Pod | – Internal Wafer Transport Carrier: Entegris KA198-80MB STAT-PRO 3000, 25 slots – Part Number: 4001-7102-01, 4001-4302-XX – Carrier seems to be in good condition |
|
| 99 | Asyst | SMIF Wafer Case Transfer Pod | – Internal Wafer Transport Carrier: Entegris KA198-80MB STAT-PRO 3000, 25 slots – Part Number: 4001-7102-01, 4001-4302-XX – Carrier seems to be in good condition |
|
| 100 | Asyst | SMIF Wafer Case Transfer Pod | – Internal Wafer Transport Carrier: Entegris KA198-80MB STAT-PRO 3000, 25 slots – Part Number: 4001-7102-01, 4001-4302-XX – Carrier is pretty dirty and has a small crack in the side |
|
| 101 | Celestry | 9812 B | Noise Analyzer | |
| 102 | Chatilliom | DFG 2 | Digital Gram Gauge | |
| 103 | Chroma | 61501 | Programmable AC Source | |
| 104 | Chroma | 650 | Switcher Analyzer | – 100V, 50A, 300W – 20 MHz |
| 105 | Clippard | ET 2 M 12 | 2 Way Valve | – 12 volts – New (open box) |
| 106 | Clippard | ET 3 M 12 | 3 Way Valve | – 12 volts – New (open box) |
| 107 | Coherent | Sabre | Ion Laser System | – Laser Head – Two Heat Exchangers – One Power Supply |
| 108 | Datron Instruments / Wavetek | 4950 | Multifunction Transfer Standard | – Options: 80 – Unit passes self confidence test, this unit is missing one button on the front but can still be pressed |
| 109 | Dickson | THDX | Humidity and Temperature Meter | – Untested |
| 110 | Dickson | THDX | Humidity and Temperature Meter | – Untested |
| 111 | Dickson | THDX | Humidity and Temperature Sensor | |
| 112 | Dranetz | 206 A | Digital Tone Burst Timing Generator | |
| 113 | Dynamco | D 1 K 2202 | Electric Valve | – 12 volts – 2.5W – New (open box) |
| 114 | Ericsson | RSU 12 | Optical Ribbon Fiber Fusion Splicer | |
| 115 | Exatron | 902 | Linear Pick & Place | With: – Dual Vision Inspection System – Gamma Scientific 0.5 Meter Optical Integrating Sphere and Spectrometer – Manual available upon request |
| 116 | Excelta | MB 1 | Mini Beeper | |
| 117 | Fluke | TI 400 | Thermal Imager | – IR Fusion Technology, 60Hz – Passes start up test, comes with manual, CD, 2 batteries and charger |
| 118 | Fluke | BT 521 | Battery Analyzer | Version: 1.2 Analog Board Version: 0.58 Device name: FLUKE-BT521-6FD13 Other items included: i410 AC/DC Current Clamp, BTL21 Battery Test Leads, BTL10 Battery Test Leads, BTL-A, TL175, Case, Calibration Board |
| 119 | General Eastern (GE) | Hygro M 2 | Dew Point Monitor | |
| 120 | Hart Scientific | 2100 | – Power cord cut | |
| 121 | HP / Agilent | 16195 A | 7mm Calibration Kit | Includes: – Comes with Low Loss Capacitor – HP / Agilent 04919-85300 – HP 04191-84302 |
| 122 | HP / Agilent | 10435 A | Passive Probe for Oscilloscope | 10:1, 7.5pF |
| 123 | IFR Systems / Marconi | 2042 | Low Noise Signal Generator | – 10kHz – 5.4GHz – options: 01 – Second LF Oscillator |
| 124 | IFR Systems / Marconi | 2041 | Low Noise Signal Generator | – 10kHz – 2.7GHz – Options: 01 Second LF Oscillator |
| 125 | Inframetrics | 760 | ||
| 126 | Intelix Balun | Digi-VGASD-R | VGA, Audio, & RS232/IR over Twisted Pair Receiver | Part Number: 900-DIGI-VGASD-R |
| 127 | JDSU | MAPF+ 1 GGP 01 FP | MAP Tunable Filter | – Can be sold with or without JDSU MAP + 2M00 Mainframe |
| 128 | JDSU | MAP+ 2 M 00 | Multiple Application Platform | – Can be sold with or without MAPF+ 1 GGP 01 FP MAP Tunable Filter |
| 129 | JDSU | SWS 15101 3642 HE 15 | Tunable Laser Source | Options: P6 / M |
| 130 | JDSU | SWS 15104 | C-Band 4-State Polarization Controller | |
| 131 | JDSU | SWS 15101 3642 HE 1500 | Tunable Laser Source | |
| 132 | JDSU | SWS 15104 | C-Band 4-State Polarization Controller | |
| 133 | Karl Suss | MJB 3 | Mask Aligner | – Array of 1W (flux output) 365nm diodes (LED EnginLZ1 UV 365 LED) – Configured for 230V power supply – Lamphouse with mercury lamp – 3″ wafer chucks – 2″ and 4″ mask holders – The pneumatics control box has leaky connections inside – The machine originally had a mercury lamp and power supply. The power supply failed a few years ago, so an array of 365nm diodes were built into the light path. The system has good power at 365, but has a dark spot on the south east edge of the exposure area. – Vacuum contact mode still worked |
| 134 | Keithley | 2500 | Dual Photodiode Meter | |
| 135 | Keysight / Agilent | N 4916 B | De-Emphasis Signal Converter | – Options: STD – Power 115 – 60Hz |
| 136 | Kraft Dynatronix | CDC 1012-.5-1 CC | Current Distribution Module | – PN: 990-0114-02 – Output 10V, 110V 50/60 Hz – Single Phase |
| 137 | Krohn-Hite | 7500 | Amplifier | |
| 138 | Leader | LG-3804 | DVB-T Signal Generator | Options: OP74, OP71 |
| 139 | LeCroy | SDA 4000 A | Serial Data Analyzer | – Dual 20GS/s, Quad 10GS/s – Hardware Options: -XXL – Software Options: ASDA ET SBA – Unit powers on and completes its self test and calibration |
| 140 | Lin Engineering | 4218 M 01-22 | Stepper Motor | 1.7A |
| 141 | Lioni Precision | DMT 12 | Dual Range Sensitivity Probe Driver Module | Lo Range: 1v .001 Hi Range: 1v .0001, +/- 15 VDC @ 130 mA |
| 142 | Litepoint | IQview AN 4031 | – WLAN 2.4/5 GHz – Unit powers on but does not boot up, bad hard drive |
|
| 143 | Lumenis | VersaPulse PowerSuite 20 W | Holmium Laser System | |
| 144 | Maury Microwave | MT 982 E | Automated Tuner | 0.8-8GHz |
| 145 | Newport | 1931 C | Optical Power Meter | |
| 146 | Newport | 819 C | Spectralon Collimated Beam Integrating Sphere | – 5.3 inch diameter, 4-Port, 2.5 inch large port |
| 147 | Newport | 1936 C | Power Meter | |
| 148 | Newport | 1936 C | Power Meter | |
| 149 | Newport | 1936 C | Power Meter | – Power supply turns on but unit does not come on. For parts, has damage to circuit board. |
| 150 | Newport | 1936 C | Power Meter | – This unit was calibrated December 2018 |
| 151 | Newport | 819 C | Spectralon Collimated Beam Integrating Sphere | – 5.3 inch diameter, 4-Port, 2.5 inch large port |
| 152 | Newport | zED-TH/N | Humidity Sensor | – Untested |
| 153 | Newport | zED-TH/N | Humidity Sensor | |
| 154 | Newport | zED-TH/N | Humidity Sensor | |
| 155 | Newport | zED-TH/N | Humidity Sensor | |
| 156 | Newport | zED-TH/N | Humidity Sensor | |
| 157 | Newport | zED-TH/N | Humidity Sensor | |
| 158 | Newport | zED-TH/N | Humidity Sensor | |
| 159 | North Atlantic | 8500 F 141 | Angle Position Indicator | |
| 160 | Osaka Vacuum | TG 1300 MCAB | Mag Suspended Turbo Pump | |
| 161 | Photonetics | Walics 3651 HR 12 | Optical Spectrum Analyzer | FC-PC Options |
| 162 | Progressive Technologies | Sentry 1000 | Blower for Tel Mark 8 | Model: 11452G01 MODUS Instruments Inc – Pressure Transmitter (Model: T10-0205) Motor: BODINE Electric company Model: 34R6BFCI, 115 volt |
| 163 | Progressive Technologies | Sentry 1000 | Blower for Tel Mark 8 | Model: 11452G01 MODUS Instruments Inc – Pressure Transmitter (Model: T10-0205) Motor: BODINE Electric company Model: 34R6BFCI, 115 volt |
| 164 | Progressive Technologies | Sentry 1000 | Blower for Tel Mark 8 | Model: 11452G01 MODUS Instruments Inc – Pressure Transmitter (Model: T10-0205) Motor: BODINE Electric company Model: 34R6BFCI, 115 volt |
| 165 | Progressive Technologies | Sentry 1000 | Blower for Tel Mark 8 | Model: 11452G01 MODUS Instruments Inc – Pressure Transmitter (Model: T10-0205) Motor: BODINE Electric company Model: 34R6BFCI, 115 volt |
| 166 | Quadtech | 7600 | Precision RLC Meter | – Unit passes self tests |
| 167 | Rohde & Schwarz | ZVC | Vector Network Analyzer | 20kHz to 8GHz |
| 168 | Rohde & Schwarz | SME 03 | Signal Generator 5kHz-3.0GHz | Options: – SME-B19 1039.3907.02 (Rear panel connections for RF and LF) – SM-B5 1036.8489.02 (FM/PM-modulator) |
| 169 | Rohde & Schwarz | SFE 100 | Test Transmitter | |
| 170 | Royce Instruments | 550 | Wire Bond Pull Tester | with 5Kg STM Load Cell |
| 171 | Rudolph / August | NSX 90 | Inspection System | |
| 172 | Rudolph / August | NSX 90 | Inspection System | |
| 173 | Scientech | 37-4002, 374 | Power and Energy Meter | – Missing Fuse Holder |
| 174 | Scientific Atlanta | 1844-3 | Digital Position Indicator | |
| 175 | Scientific Atlanta | 4100 | Positioner Control Indicator Series | Model: 4111 Watts: 1k Volts: 115 Cycles: 50/60 Hz Notes: on/off light is not working, adjustment controls working 2-116 VAC, forward/reverse switch working, equipment seems to be working but unable to test without motor |
| 176 | Semitool | 240 S-3-1-E-ML | Spin Rinse Dryer | |
| 177 | Spectra Physics | 117 A | Stabilized HeNe Laser Controller | – Unit is missing keys to power on but you can change the locks to switches |
| 178 | Spectroline | EN 104 L-BV | Long Wave Ultraviolet Light Lamp 365nm | |
| 179 | Spirent | GSS 6300 | Multi-GNSS Generator | – PN: GSUA-6078 – Single Channel – Power 120/240 – 50/60 – 3 Amps Includes: – GPS L1 – Sbas 6001 firmware upgrade support – Gal IN single chassis |
| 180 | Spirent | GSS 6700 | Multi-GNSS Simulator | Model: GSUA-0120 |
| 181 | Stanford Research Systems (SRS) | SR 510 | Lock-in Amplifier | |
| 182 | SyntheSys Research | DPP 12500 A-4 T BERTScope | Four Tap Digital | – 1-12.5Gb/s – 14GB Upgraded – 100-240V 50/60 Hz CE |
| 183 | Tegram | 900 A | Solder System Tester | |
| 184 | Tektronix | TLA 704 | Logic Analyzer Color Portable Mainframe | |
| 185 | Tektronix | TLA 7 M 4 | 136 Channel LA Module with MagniVu Acquisition | |
| 186 | Tektronix | TLA 7 L 3 | 102 Channel LA Module with MagniVu Acquisition | |
| 187 | Tektronix | TLA 5203 | Logic Analyzer | |
| 188 | Tektronix | TDS 8000 | Digital Sampling Oscilloscope | Includes: – 80C12 Optical Sampling Module – 80A05 Clock Recovery Module |
| 189 | Tektronix | 80 A 05 | Clock Recovery Module | |
| 190 | Tektronix | DTG 5078 | Data Timing Generator | – 750Mb/s – Includes National Instruments PXI-GPIB Module |
| 191 | Tektronix | TLA 5202 | Logic Analyzer | – 68 Channel – Chassis: 512MB DRAM / 80.0 GB HDD – TLA5F202 Option 51 Field Upgrade Increase to 8Mb Record Length @ 235 MHz State Speed |
| 192 | Tektronix | TLA 5203 | 102 Channel Logic Analyzer | – Options: 8S – 8Mb Memory Depth @ 235 MHz State Speed – 47 to 63 Hz – 100V to 240V – 220W Max |
| 193 | Tektronix | 1230 | Logic Analyzer | |
| 194 | Tektronix | DTG 5078 | Data Timing Generator | – 750Mb/s Includes: – National Instruments PXI-GPIB Module – (QTY: 1) DTGM10 Output Modules |
| 195 | Tektronix | DTG 5078 | Data Timing Generator | – 750Mb/s – National Instruments PXI-GPIB Module |
| 196 | Tektronix | PS 2520 G | Programmable Power Supply | – Power: 110/240 – 50/60 – 0-20A |
| 197 | Tektronix | P 7350 | Differential Probe | 5.0 GHz <100 ps tr 6.25X ATTEN Common Mode Range +6.25V, -5V Offset +/- 1.25V Diff Input C, <0.3pF R, 100KOmega Range +/- 2.5V |
| 198 | Tektronix | TCP 202 A | Current Probe | 300V CAT I 15A peak |
| 199 | Tektronix | TDP 3500 | Differential Probe | 3.5 GHz tr<110ps(typ) Vdifferential: +/-2.0V |
| 200 | Tektronix | TLA 704 | Logic Analyzer Color Portable Mainframe | – Windows 95 Based – Power: 90-250V 50/60 Hz Includes: – TLA 7D2 4 Channel DSO – TLA 7L1 Module – CRT Monitor – Cart |
| 201 | Tektronix | AWG 5012 | Arbitrary Waveform Generator | – 1.2 GS/s – Passes all start up tests and calibration |
| 202 | Tektronix | 2402 A Tekmate | Floppy Disk Drive | – Powers on and runs through start up tests, does not appear to have any issues. Does not come with any disks. |
| 203 | Tektronix | TLA 7 D 2 | DSO Module | 4CH, 500MHz, 2.5GS/s, FW V1.1 |
| 204 | Tektronix | TLA 7 L 1 | Logic Analyzer 34 channel module, FW V2.0 | Options: STD – 2GHz timing, 100MHz state, 32K depth |
| 205 | Tektronix | 2402 A Tekmate | Floppy Disk Drive | – Powers on but does not run any self diagnosis start up tests. Unit does not come with any disks. |
| 206 | Tektronix | TCP 202 | Current Probe | – Probe is functional but is missing one button to slide the probe open and close. The probe can still be opened by hand |
| 207 | Tektronix | MSO 2024 | Mixed Signal Oscilloscope | – 200 MHz, 1 GS/s, 1M Record Length, 4+16 Channels – Scope passes all self tests, has only been powered on a total of 3 times with a total ‘on’ time of 1 hour, included original manuals and CDs |
| 208 | Tektronix | MSO 3054 | Mixed Signal Oscilloscope | – 4 Channel Analog + 16 Channel Digital, 500 MHz, MHz, 2.5 GS/s – Total time powered on only 6 hours, includes original manual, CDs, and front cover for scope |
| 209 | Tektronix | MSO 4104 | Mixed Signal Oscilloscope | – 1GHZ, 5 GS/S, 10M – Application Module: DPO4COMP – Computer Serial Triggering and Analysis – Passes all self tests and has only been powered on a total of 6 times, has original manual and CD |
| 210 | Tektronix | MSO 3054 | Mixed Signal Oscilloscope, 500 MHz, 2.5 GS/s | Scope passes all self tests, includes the original manual and CDs |
| 211 | Tektronix | P 6139 B | Passive Probe for Oscilloscope | – 500 MHz – New in box – Includes 2 probes total |
| 212 | Tektronix | P 2221 | Passive Probe for Oscilloscope | – 200MHz – 16pF/95pF – 10X/1X – 300V/150V – 6MHz – 10X / 1X |
| 213 | Tektronix | P 6139 A | Passive Probe for Oscilloscope | – 500MHz – 8.0pF – 10X – 300V |
| 214 | Tektronix | P 6203 | Bipolar Probe | – 1.0 GHz – 1.8pF – 10X – 40V |
| 215 | Tektronix | P 6243 | Active Oscilloscope Probe | – 1GHz – 10X – <1pF – 40V |
| 216 | Tektronix | P 6417 | Logic Analyzer Probe Cable | |
| 217 | Tektronix | P 2221 | Passive Probe for Oscilloscope | – 200MHz / 6MHz – 16pF/95pF – 10X/1X – 300V/150V |
| 218 | Tektronix | P 2221 | Passive Probe for Oscilloscope | – 200MHz / 6MHz – 16pF/95pF – 10X/1X – 300V/150V |
| 219 | Tektronix | P 2221 | Passive Probe for Oscilloscope | – 200MHz / 6MHz – 16pF/95pF – 10X/1X – 300V/150V |
| 220 | Tektronix | P 6139 A | Passive Probe for Oscilloscope | – 500MHz – 8.0pF – 10X – 300V |
| 221 | Tektronix | P 6139 A | Passive Probe for Oscilloscope | – 500MHz – 8.0pF – 10X – 300V |
| 222 | Tektronix | P 6139 A | Passive Probe for Oscilloscope | – 500MHz – 8.0pF – 10X – 300V |
| 223 | Tektronix | P 6243 | Active Oscilloscope Probe | – 1GHz – 10X – <1pF – 40V |
| 224 | Tektronix | P 6243 | Active Oscilloscope Probe | – 1GHz – 10X – <1pF – 40V |
| 225 | Tektronix | P 6417 | Logic Analyzer Probe Cable | |
| 226 | Tektronix | AM 502 | Differential Amplifier | – Does not power on, parts machine |
| 227 | Tektronix | PS 5010 and TM 5006 | Programmable Power Supply | with TM 5006 |
| 228 | Tektronix | 2520 | 6 Slot Mainframe Test Lab Multi-Channel Wave Analyzer | Includes Modules: (QTY: 1) 25AD3, (QTY: 4) 25AA1 |
| 229 | UVP | UVG-11 | Short wave UV-254NM | |
| 230 | Virgina Scientific Instruments (VSI) | FW 101 | NMR Magnetometer | – Unit powers up but the pump was disconnected inside because of leaks and missing tubing for liquid |
| 231 | ViTrek | V 60 | AC Safety Analyzer | |
| 232 | Wavecrest | DTS 2077 | Digital Time System | – 100-230V – 50/60Hz |
| 233 | Wavetek | 4950 | Multifunction Transfer Standard | – Unit passes self confidence test |
| 234 | Yaskawa | XU-ACL 4203 | Ball Screw, 1000mm Travel | – Applied Materials PN: 0190-10289 – 63″ x 28″ Platform – Carrier – 13 x 10 – Stage in good condition, cover has dent |
| 235 | Tektronix | P 6139 A | Passive Probe for Oscilloscope | – 500MHz – 8.0pF – 10X – 300V |
| 236 | Tektronix | P 6139 A | Passive Probe for Oscilloscope | – 500MHz – 8.0pF – 10X – 300V |
| 237 | Tektronix | P 6139 A | Passive Probe for Oscilloscope | – 500MHz – 8.0pF – 10X – 300V |
| 238 | Tektronix | P 6139 A | Passive Probe for Oscilloscope | – 500MHz – 8.0pF – 10X – 300V |
| 239 | Tektronix | P 2221 | Passive Probe for Oscilloscope | – 200MHz – 16pF/95pF – 10X/1X – 300V/150V – 6MHz – 10X / 1X |
| 240 | Tektronix | P 2221 | Passive Probe for Oscilloscope | – 200MHz / 6MHz – 16pF/95pF – 10X/1X – 300V/150V |
| 241 | Tektronix | P 2221 | Passive Probe for Oscilloscope | – 200MHz / 6MHz – 16pF/95pF – 10X/1X – 300V/150V |
| 242 | Tektronix | P 2221 | Passive Probe for Oscilloscope | – 200MHz / 6MHz – 16pF/95pF – 10X/1X – 300V/150V |
| 243 | Tektronix | P 6243 | Active Oscilloscope Probe | – 1GHz – 10X – <1pF – 40V |
| 244 | Tektronix | P 6243 | Active Oscilloscope Probe | – 1GHz – 10X – <1pF – 40V |
| 245 | Tektronix | P 6243 | Active Oscilloscope Probe | – 1GHz – 10X – <1pF – 40V |
| 246 | Tektronix | P 6139 B | Passive Probe for Oscilloscope | – 500 MHz – New in box – Includes 2 probes total |
| 247 | Tektronix | AM 502 | Differential Amplifier | – Does not power on, parts machine |
| 248 | Tektronix | P 6203 | Bipolar Probe | – 1.0 GHz – 1.8pF – 10X – 40V |
| 249 | Tektronix | P 7350 | Differential Probe | 5.0 GHz <100 ps tr 6.25X ATTEN Common Mode Range +6.25V, -5V Offset +/- 1.25V Diff Input C, <0.3pF R, 100KOmega Range +/- 2.5V |
| 250 | Tektronix | TCP 202 | Current Probe | – Probe is functional but is missing one button to slide the probe open and close. The probe can still be opened by hand |
| 251 | Tektronix | 80 A 05 | Clock Recovery Module | |
| 252 | Tektronix | TLA 5203 | Logic Analyzer | |
| 253 | Tektronix | TCP 202 A | Current Probe | 300V CAT I 15A peak |
| 254 | Tektronix | TDP 3500 | Differential Probe | 3.5 GHz tr<110ps(typ) Vdifferential: +/-2.0V |
| 255 | Tektronix | TLA 7 D 2 | DSO Module | 4CH, 500MHz, 2.5GS/s, FW V1.1 |
| 256 | Tektronix | TLA 704 | Logic Analyzer Color Portable Mainframe | – Windows 95 Based – Power: 90-250V 50/60 Hz Includes: – TLA 7D2 4 Channel DSO – TLA 7L1 Module – CRT Monitor – Cart |
| 257 | Temptronic | TPO 4000 A-2 B 21-2 | Temperature Forcing System | |
| 258 | UVP | UVG-11 | Short wave UV-254NM | |
| 259 | Virgina Scientific Instruments (VSI) | FW 101 | NMR Magnetometer | – Unit powers up but the pump was disconnected inside because of leaks and missing tubing for liquid |
| 260 | ViTrek | V 60 | AC Safety Analyzer | |
| 261 | Wavecrest | DTS 2077 | Digital Time System | – 100-230V – 50/60Hz |
| 262 | Wavetek | 4950 | Multifunction Transfer Standard | – Unit passes self confidence test |
| 263 | Yaskawa | XU-ACL 4203 | Ball Screw, 1000mm Travel | – Applied Materials PN: 0190-10289 – 63″ x 28″ Platform – Carrier – 13 x 10 – Stage in good condition, cover has dent |
| 264 | Zygo | Mark III-01 | – P/N: 6176-0100-01 – Table Included |
|
| 265 | Optical Power Meter |
